Ensuring you're hitting your build times is always a major priority in surface mount production. The challenge for many Original Equipment Manufacturers (OEMs) however, is that the processes involved with printed circuit board assembly (PCBA) can be numerous and complex. And the smallest of details can make the biggest of differences.
In this blog post we explore four core electronic component packaging issues that will help you streamline production, meet your targets and keep your costs down.
1. Keep component variations to a minimum
It's not uncommon to find that a design engineer has listed several similar components against the same board reference when specifying the Bill of Materials (BOMs).
While this element of choice might be offered with the best intentions, it can prove a challenge, as the parts that are supplied by different manufacturers can potentially vary in size and shape.
Surface mount pick and place programmes are often set up against one specific part. Any deviations outside of the expected tolerances could result in the part being rejected and the production line coming to a grinding halt.
For consistency, always request that your materials supplier settles on just one approved part - or at the very least that they give you the heads up about any possible variations so your pick and place programmes can be updated offline and you avoid any costly machine downtime.
2. Opt for the most efficient packaging
The format in which devices are supplied can vary widely - especially when it comes to Integrated Circuits (ICs).
Typical IC packaging methods can include waffle trays, tubes and reels - each of which are often differentiated by a specific letter or number at the end of the part number.
If you're aiming for optimum efficiency then taped and reeled parts are preferable as the use of tubed components relies on having operators on hand to change the parts over as the tubes become empty, which can delay the manufacturing process.
There are of course certain situations where requesting taped and reeled parts simply may not be viable - for example in the case of New Product Introductions (NPIs) where batch sizes are typically smaller. In those situations it probably won’t make commercial sense to purchase a larger quantity of device just so you can receive it in a taped and reeled format.
If you do decide to change a part from tubed packaging to tape and reel, you'll also want to make sure that the quality of the seal on the cover tape is sufficient. A poor quality seal increases the risk the cover tape dislodging which can mean components could become damaged or lost.
3. Avoid splicing components
Sometimes a combination of smaller amounts of taped and reeled components may need to be spliced together to create one larger, continuous strip.
But if this splicing is poorly executed, there is an increased chance that the tape could become stuck in the surface mount machine feeders. And, if the cover tape pulls away from the carrier tape, then you'll be left with a jammed machine that will need to resolved by an operator leading to costly downtime.
4. Plan for things not always to go to plan
Inherent within the manufacturing process, is the knowledge that things occasionally don't go quite as expected. If a surface mount machine misplaces, drops or damages a component - and you don't have more of that component in stock - then you're likely to be left with two tough choices: You can opt to carry on with the SMT build regardless, and then fit the part by hand once it arrives. Or you can halt the job while you order (and wait for) the replacement part.
The reality is that neither option is especially ideal - fitting parts by hand can affect quality, increase the risk of damage and impact on your lead times. While opting to halt the job means your machines are sitting idle and costing you money.
Building attrition into your kit of parts may cost you a small amount at the outset, but it can potentially save you hundreds of pounds in additional rework. So, whenever possible, make sure you request a few more of each component than you actually think you're going to need.
The smallest of details can have a massive impact on the efficiency of your PCBA production. By having a programme in place to continually monitor and refine your processes you'll be able to identify and eliminate what not's working, retain a firm hand on quality and boost your profitability.